FAN
With this button the fan speed of the exhaust and supply fan can be changed.
* Pressing once: text FAN lights up. "
EXHAUST FAN
" and current fan speed (text) starts blinking
* Use buttons to select fan speed (high, med, low)
* Press OK to confirm
* “
SUPPLY FAN
" and current fan speed (text) starts blinking
* Use buttons to select fan speed (high, med, low)
* Press
OK
to confirm
* Text FAN and HIGH, MED, LOW lights up
TIMER
Press to set timer function on/off. When "on" the display shows
SET
RESET
Press to reset filter check. When "on" the display shows FILTER CHECK.
Default Filter Check the value in use in parameter list 2.3.3.
CONTROL PANEL (Models For Electric Heater)
RUNSTOP
MODE
Press to select the listed modes of operation (FAN, COOL,
HEAT, AUTO, VOD). Every time button is pressed, next mode lights
up. After a 5 seconds delay the mode will be activated. The text
MODE on display is always visible.
MODE
FAN
COOL
HEAT
AUTO
VOD
Shows active mode
of operation
FAN
HIGH
MED
LOW
12.00
25
C
0
BY - PASS
FUNCTION
FILTER
CHECK
EXHAUST FAN SUPPLY FAN
SET TEMP
MON TUE WED THU FRI
SAT SUN
SET
Only visible when
changing fan speed
Shows
current day
Actual time or
timer block s
Actual r oom temp or
set point
Shows actual fan speed of
supply and exhaust fan
Lights up when
By-Pass is open
Lights up when filters
should be checked
MODE
FAN
HIGH
MED
LOW
FAN
COOL
HEAT
AUTO
VOD
MON TUE WED THU FRI S AT
SUN SET
SET TEMP
12.00
25°C
EXHA UST F AN
SUPPLY FAN
BY-PASS
FUNCTION
FILTER
CHECK
MODE
RUN/ST OP
HRV
FAN SPEED
TIMER
RESET
SCHEDULE
DAY
SELEC T
OK
When the backlight and led is off, press the button
once to turn the unit on.
When the unit is “on” press on / off 2 seconds to
switch it off.
Increase / decrease set point room tempreature
(SET TEMP is on)
17
+30.211.70.55.500 +30.210.22.23.283
