background image

page 4  

 - CYPRES 2 User’s Guide -

The  CYPRES 2 combines tried and tested qual-

ity and reliability with a wealth of expertise and 

technological progress following many years of 

continuous research and development since 1991.  

 CYPRES 2 offers numerous features and attributes 

including the following:

  The unit is waterproof for up to 15 minutes 

down to a depth of 15 feet (5 meters) in both 

freshwater and saltwater. At a depth of 8 feet 

(2.5 meters) or less the unit is waterproof for 

up to 24 hours.

  The unit’s power supply is maintenance-free 

for the user. There is no need to observe a 

replacement date, record the number of jumps 

made, monitor the voltage during self-test, 

purchase a battery, or have a rigger open or 

repack the reserve for this reason.

 The 

serial number can be accessed from the 

display.

  The maintenance due date can be accessed 

from the display.

  The unit will remind you when it is approach-

ing its next maintenance date.

  The unit is small and lightweight.

  The unit has a robust, rigger-friendly case with 

rounded corners and edges.

  The unit has an extended maintenance 

window of +/- 6 months from the month of 

manufacture. This allows the user to avoid 

downtime during the busy part of the year 

regardless of the month of manufacture.

  The unit completes its self-test in 10 seconds.

Summary of Contents for Expert CYPRES 2











































































Reviews: