Airtec Expert CYPRES 2, User Manual

Page: 43 / 74

page 42 - CYPRES 2 User’s Guide -
7.1 Maintenance reminder
Approaching the beginning of the first maintenance
window your CYPRES 2 will start to show you
that maintenance is available and the unit will
display the proposed month and year (e.g.,
for unit DOM 11/2020). This will happen after the
unit is switched on during the self-test between the
unit showing and . From the day
when this appears you have 13 months to send in
the unit and be within the maintenance window.
After these reminders the unit will continue and
switch to .
Starting time/display duration Display
(DOM 11/2020)
6 months prior to the mainte-
nance date, the beginning of the
maintenance window appears
for 2 seconds.
At the maintenance date, this
appears for 3 seconds.
3 months after the maintenance
date, this appears for 5 seconds.
6 months after the maintenance
date, the end of the maintenance
window appears for 5 seconds.
If the first maintenance has been performed on
your CYPRES 2, then your unit will notify you of
the second (and last) maintenance as it approaches
the beginning of the second maintenance window.
This will happen regardless of when the first main -
tenance was performed. The reminders are only
deactivated during maintenance.
After the second maintenance, your CYPRES 2
should be usable until the end of its service life. For
the service life schedule see Section 12.1.
During the service life of a CYPRES 2 unit, the
skydiver should not incur any costs of operation
other than the two maintenance fees (except for
any replacement cutters or waterproof filters that
may be required).
Please contact your local CYPRES 2 dealer regard-
ing maintenance. See https://www.cypres.aero/
dealers/ or contact Airtec or SSK if you do not
know who your local dealer is.