Airstream LAND YACHT 2005, Owner'S Manual

Page: 101 / 130

AIRSTREAM LAND YACHT GAS
MICROPULSE SYSTEMS MONITOR OPERATION INSTRUCTIONS
This example shows the monitor reporting the following:
Fresh Water = 1/8 to Empty
Gray Water 1 = Empty to 5/8
Gray Water 2 = 3/4
Black Water = Empty to 5/8
LP Gas = 1/4
Battery = Empty to 5/8
On all diagrams the Letters R=Red, Y=Yellow,
G=Green, Blank=no LED lit.
NORMAL OPERATION
The MicroPulse Monitor will display the condition of each
system at all times. The tri-color LED beside the system
will indicate the condition of the system using the following
color code.
Fresh Water, LP Gas, Battery are as follows:
Green LED = 3/8 to Full
Yellow LED = 1/4
Red LED = 1/8 to Empty
Gray Water, Black Water are as follows:
Green LED = Empty to 5/8
Yellow LED = 3/4
Red LED = 7/8 to Full
TO OBTAIN EXACT READING
To obtain an exact reading of all systems press and release the status button one time. The monitor will
flash the LED beside the system it is about to report. It will than display the exact condition of that system
by lighting the bar graph from Empty to Full. The monitor will display the exact condition of each system
and then return to normal operation mode.
To obtain an exact reading of an individual system press and release the status button until the LED beside
the system that you want the condition of is lit. Release the status button and the monitor will display the
exact condition of that system by lighting the bar graph from Empty
H-10