Airstream 2013 International Owner'S Manual Download Page 89

Page: 89 / 127

F - 8

F - 9

PLUMBINg

GALLEY FAUCET

Moen, Torrance Single Handled Kitchen Faucet w/Side Spray

Model 87484

For parts and local warranty service contact Moen at 1-800-Buy Moen

CARE AND MAINTENANCE

To preserve the finish on the metallic parts of your

Moen faucet, apply non-abrasive wax, such as car wax. Any cleaners should

be rinsed off immediately.

DO NOT SUBMERGE OR PLACE FAUCET HEAD IN DISHWASHER.

Questions

If you have any questions please call the Moen toll-free help lines:

1-877-DRINK-H20

Monday through Friday

8:00 a.m. to 8:00 P.M.

1-877-374-6542

Saturday

8:00 a.m. to 6:30 p.m.

Galley Faucet Filter

An inline filter has been provided for the galley faucet under the galley top. It

can be accessed by opening the galley cabinet door. Your dealer has been

provided instructions on its installation. The unit is shipped with a bypass line

that should be used later for winterizing unit.

Summary of Contents for 2013 International
































































































































Search results

Summary of Contents for 2013 International

Reviews:

Airstream 2013 International, Owner'S Manual, Page: 89 / 127

Search results

Summary of Contents for 2013 International

Reviews: