En-6
Install the front panel to the rear panel.
(10)
CN13
When installing the front
*
panel to the rear panel,
install it carefully so that the
cable is not pinched or the
parts of the circuit board are
not pushed by things project-
ing from the rear panel. The
circuit board parts may be
damaged.
Install the screw (1 pc) and
fi
x the panels.
(11)
Installation Method - Separate type
6. 5.
CAUTION
Always use the extension cable of service parts (9708798011) to
connect the separate type power supply unit and control unit. If a
cable outside the speci
fi
cations (accessory connection cable or
other remote controller cable) is processed and used, the power
may not turn on or other trouble may occur.
The length of the extension cable (9708798011) is 5m (16 ft.).
Connect the power supply unit and control unit with the length less
than 5m (16 ft.).
A. Power supply unit wiring
Pass power supply
(1)
cable through Hole-A, and connect it to the
power supply terminal of the power supply unit PC board.
Fix with
(2) cable
tie
fi
rmly.
POWER SUPPLY
L N
L N
Hole-A
POWER SUPPLY
Cable tie (accessory)
Power supply
cable
Open the knockout of hole-B section, and install the one touch
(3)
bush.
Pass the extension cable (
(4)
service parts) through Hold-B, and
connect it to the relay connector coming from the power supply
unit.
Fix with
(5) cable
tie
fi
rmly.
POWER SUPPLY
L N
One touch bush
(accessory)
Relay connector
Extension cable (service parts)
Cable tie (accessory)
Hole-B
Hole-B
Hole-B
Install the power supply unit cover, and tighten the screws (4
(6)
pcs).
Fix the holder 1 assembly (2 places) with screws (2 pcs x 2
(7)
places).
Power unit cover
Screw×4
(When
fi
xing the Holder,
remove the 4 screws in
advance.)
Screw×4
(Accessories)
Holder
(accessory)
B. Controller body wiring
Pull around the transmission cable as shown in the
fi
gure, and
(1)
connect it to the terminal of the rear panel.
Pull around the extension cable as shown in the
fi
gure, and
(2)
connect it to the terminal of the rear panel. And
fi
x with cable tie
fi
rmly.
+5V
GND
X1
X2
Extension cable
Transmission cable
Terminal
connection
Cable tie
(accessory)
Transmission cable
Extension cable
(service parts)
