En-5
4
Press the Set Time buttons to set the time in 10-minute increments.
* Hold down a Set Time button to adjust the time quickly.
5
Decrement Increment
●
Operating setting
Raise
Lower
Press the Start/Stop button or the Mode button or the Set Temperature button to set
the operation.
* For the operations that can be set, refer to “Operation mode setting”, “Room tem-
perature setting” (page 3), and “To start/stop operation” (page 4), in “OPERATION”.
* Only the current operation settings are displayed.
ex. TIMER-1 will start operation at 8:00 on COOL.
6
●
Setting the next timer for the same day:
TIMER-1
TIMER-2
TIMER-3
TIMER-4
Then press the ENTER button to proceed to the time setting, and repeat steps from
4
to
5
.
●
Repeat steps
3
to
5
to set the timer for another day of the week.
Be careful for pressing the ENTER button without any operation setting because the time that is set will be
cancelled.
●
To delete the operating time
WEEKLY TIMER
●
Timer setting
AM
8
When the operating time is set, the
mark appears.
ex. TIMER-1 will start operation at 8:00 on COOL with a set-
ting of 20 °C.
1. Press the ENTER button to confirm the set timer.
2. Press again the PROGRAM (CLOCK ADJUST)
button to complete the weekly timer setting.
*
flashes for two seconds.
CLOCK ADJUST
7
●
Setting the timer for the other indoor units:
Before setting the timer for other indoor units, press the ENTER button to confirm the
settings.
* The display switches to the next timer.
●
Repeat steps
2
to
6
to set the timer for other indoor units.
1. If the Timer Mode (DELETE) button is pressed during steps
3
to
7
, the operat-
ing time for the selected day will be deleted.
* If all the days are selected, the operating times for all of the days of the se-
lected timer will be deleted.
2. Press the ENTER button to confirm the deletion.
AM
Summary of Contents for UTY-CGG
Page 8: ......
