605-0000-701 EasyST Hardware Installation User Guide Rev I
22
Professional Mode #1
Modulation
Modulation
LED #1
LED #2
LED #3
LED #4
LED #5
BPSK_1/2
OFF ON OFF OFF OFF
QPSK_1/2
OFF OFF ON OFF OFF
QPSK_3/4
ON OFF ON OFF OFF
16QAM-1/2
OFF OFF OFF ON OFF
16QAM_3/4
ON OFF OFF ON OFF
64QAM_2/3
OFF OFF OFF OFF ON
64QAM_3/4
ON OFF OFF OFF ON
Professional mode #2
RSSI
Average RSSI Values (dBm)
5 Signal LEDs
RSSI < (-95)
All LEDs are OFF
(-95) < = RSSI< (-90)
First (left) LED is ON
(-90) < = RSSI < (-85)
Two first (left) LEDs are ON
(-85) < = RSSI < (-80)
Three left LEDs are ON
(-80) < = RSSI < (-75)
Four left LEDs are ON
(-75) < = RSSI
Five LEDs are ON
LED Button
The LED button (full support planned for future) located below the LED lights provides the following
functionality:
Toggles between LED modes: Each time you press the button, the LED mode changes:
o
Customer (standard mode): Signal LEDs display SNR value as described in the table
above
o
Professional #1: provides technician with an indication of the modulation and FEC
used in the uplink
o
Professional #2: provides technician with indication of RSSI
o
Professional #3: provides technician with indication of downlink throughput (planned
for future)
Resets EasyST to factory default settings
: To reset to default settings, hold down the
button for 10 seconds.
Note: When any of the Professional modes are active for 30 seconds, the mode returns
automatically to the Customer mode.
