AirSpeed 2900 gNB 5G OD Installation Guide
© Copyright
Airspan Networks Ltd.,
2021
P/N DUG01085
Rev. A, Nov 2021
7
Safety
1.
Read this guide and follow all operating and safety instructions.
2.
Supply cord is not shipped with the unit and is to be provided by user. Installation is to be
performed by a qualified electrician according to local codes. Installation to be done in
accordance with the National Electrical Code (NEC), ANSI/NFPA 70, the Canadian Electrical Code
(CEC), Part I, CAN/CSA C22.1, and when applicable, the National Electrical Safety Code, IEEE C2.
3.
Static sensitive components inside - do not remove the lid or base: No user serviceable parts
inside.
4.
The ground connection should be made before connecting to supply connections.
5.
Position the power cord to avoid possible damage; do not overload circuits.
6.
Do not place this product on or near a direct heat source, and avoid placing objects on the
terminal.
7.
To avoid electrical shock do not install this device during adverse conditions such as rain or
inclement weather.
8.
Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners. Disconnect the power
before cleaning.
9.
The units should not be located too near power lines or other electrical power circuits, where it
can come into contact with such power lines or circuits.
10.
The radio transceiver must be properly grounded to protect against power surges and
accumulated static electricity. It is the user’s responsibility to install this
device in accordance
with the local electrical codes.
11.
Installation of the AirSpeed 2900 gNB must be contracted to a professional installer.
12.
The circuit breaker should be easily accessible in case you have to disconnect the device.
13.
When installed in the final configuration, the product must comply with the applicable Safety
Standards and regulatory requirements of the country in which it is installed. If necessary, consult
with the appropriate regulatory agencies and inspection authorities to ensure compliance.
Warning of Hazardous Voltages
On AC installations, hazardous voltages exist. Use caution when verifying or working with AC power.
Remove metal jewelry that could come into contact with AC power.
On DC sections, short-circuiting the low voltage, low impedance circuits can cause severe arcing that
may result in burns or eye damage. Remove rings, watches etc. to avoid shorting DC circuits.
Airspan products do not contain hazardous substances (as defined in UK Control of
Substances Hazardous to Health Regulations 1989 and the Dangerous Substances
Regulations 1990). At the end of any Airspan products life cycle, the customer should
consult with Airspan to ensure that the product is disposed of in conformance with the
relevant regulatory requirements
.
Adherence to European Directive 2014/53/EU
European Council Recommendation 2014/53/EU details basic restrictions and reference levels on
human exposure to electromagnetic fields as advised by the ICNIRP. Adherence to these
recommended restrictions and reference levels should provide a high level of protection as regards
the established health effects that may result from exposure to electromagnetic fields.