
19
Changing the Blade
1. Turn off the machine and unplug the
power cord from the machine.
2. Remove the three screws (A) holding on
the left side of the housing.
3. Remove the small screw (B) on the
machine frame.
4. Locate the blade between the circuit board
and blower hose, and remove the screw (C).
5. Note the orientation of the blade before
removal, and make sure to align the new
blade in the same manner that the old
blade was removed.
6. When installing new blade, make sure front
of blade is seated below the outer surface
of the nozzle. Failure to perform this may
result in the film not cutting and cause clogs
in the machine.
7. Reinstall covers, and test machine function.
A
B
C
Blade removed from nozzle
Maintenance
Summary of Contents for G6
Page 1: ...REV 2 10122022 USER MANUAL G6 ...
Page 4: ...Technical Data 4 ...
Page 22: ...Service 22 ...
Page 23: ...Accessories 23 ...