
User Screens
FINE TUNE SCREEN
•
Press the number above
“Motor Speed”
to select the
motor speed fine tune. Then adjust the number up or
down using the arrows.
•
Press the number above
“Blower Speed”
to select the fan
speed fine tune. Then adjust the number up or down using
the arrows.
•
Press the number above
“Temperature”
to select the seal
temperature fine tune. Then adjust the number up or
down using the arrows.
•
“Enter”
goes back to the Settings Menu
•
“Service”
goes to a service screen
SERVICE SCREEN
•
“Total Film Feet”
is the linear feet of material the machine has
dispensed
•
“Total On/Off Cycles”
is the number of times the machine has
started and stopped running
•
“Settings”
navigates you to the photo-eye delay and
accessories screen. Accessories gives the choice to use a photo-
eye, or foot switch, Photo-eye delay let you fine tune the delay
of the Photo-eye operation.
•
“Reset”
changes the fine tune setting to the factory setting for
a given speed and film choice
•
“Reset All”
changes all the fine tune settings to the factory
settings
•
“Back”
goes back to the settings menu
12
Fine Tune Screen
Service Screen
Photo Eye Delay Screen
PHOTO EYE DELAY SCREEN
•
“Start Delay”
is the delay of time to begin operating the
machine after the photo-eye has been triggered to start
.
•
“Stop Delay”
is the delay of time to halt operation of the
machine after the photo-eye has been triggered to stop
.
Summary of Contents for G6
Page 1: ...REV 2 10122022 USER MANUAL G6 ...
Page 4: ...Technical Data 4 ...
Page 22: ...Service 22 ...
Page 23: ...Accessories 23 ...