Airpress HL 360/50 compact, Instruction Manual

Page: 16 / 64

14
ENGLISH
TABLE OF CONTENTS
1.0 Prefatory note page 14
2.0 Safety instructions page 15
3.0 Placing page 16
3.1 Electric connection page 16
3.2 Air connection page 16
4.0 First use page 17
5.0 Operation page 17
6.0 Maintenance page 18
7.0 Possibilities of failure page 19
8.0 Technical details page 19
Spare parts page 53
ATTENTION
To be able to use this compressor installation properly, a number of measurements
must be taken. The following points will contribute to making you a satisfied user of
this installation.
1.0 PREFATORY NOTES
Buying your Airpress compressor installation, you have become the owner of a
compressor installation with a high performance and reliability level. Correct use and
regular maintenance will increase the life of the compressor.
In this manual you will find operation and maintenance instructions. Read it carefully
and keep it as a guide to your compressor.
The compressor has been built to supply compressed air. In particular the appliance
cannot be used to produce air to be breathed by humans or used on direct contact
with foodstuffs. The appliance must be used only for the purpose for which it was
specifically designed. All other uses are to be considered incorrect and therefore
unreasonable. The manufacturer cannot be held responsible for any damage
resulting from improper, incorrect or unreasonable use. This machine is not suitable
for external installation.
Legend (fig. A)
1 Air filter 6 Oil filler cap
2 Pressure gauge 7 Pressure switch
3 Reducing valve 8 Oil leveler
4 Pressure gauge 9 Oil drain plug
5 Coupling 10 Draintap for condensation water