AIROS AIROS 8 Operating Instructions For Use Manual Download Page 15

12

3.4

THERAPY MODE 
SELECTION SCREEN

This is the THERAPY MODE SELECTION SCREEN. 

To utilize Gradient Mode therapy, press UP 

 

or DOWN 

 

to scroll to GRADIENT MODE. Press SELECT to confirm and 

proceed to 3.5.

To utilize Pressure Mode, press UP 

 

or DOWN 

 to scroll 

to PRESSURE MODE. Press SELECT to confirm and proceed 

to 3.8

To go back to the MAIN MENU SCREEN, press UP 

 

or 

DOWN 

 to scroll to BACK TO MAIN MENU. Press SELECT 

to confirm.

3.5

GRADIENT MODE SET-UP 
SCREEN

NOTE: Press UP 

 

or DOWN 

 to scroll to MORE or 

PREVIOUS to view additional settings options. 

The gradient cannot be changed and is fixed at 4%. 

To set the Pressure, press UP 

 

or DOWN 

 to scroll to 

PRESSURE. Press SELECT to confirm. The pressure will 

begin blinking. Press UP 

 

or DOWN 

 to scroll from 30-80 

mmHg, in increments of 1 mmHg. Press SELECT to confirm. 

The pressure will be updated and stop blinking.

To set the Cycle Time, press UP 

 

or DOWN 

 to scroll to 

CYCLE TIME. Press SELECT to confirm. The cycle time will 

begin blinking. Press UP 

 

or DOWN 

 to scroll to 40 or 

60 seconds. Press SELECT to confirm. The cycle time will be 

updated and stop blinking.

 

GRADIENT MODE

  PRESSURE MODE

  BACK TO MAIN MENU

 GRADIENT: 4%

  

 PRESSURE: 45mmHg

  CYCLE TIME: 60 sec

   

 MORE 

Operating Instructions (continued)

 PREVIOUS 

  THERAPY TIME: 60 min 

   SKIP CHAMBER: OFF 

   

 MORE 

 PREVIOUS 

   LPT MODE: CLEARING 

   BACK TO MAIN MENU

   BEGIN TREATMENT 

   

Summary of Contents for AIROS 8

































Reviews: