AIROS AIROS 8 Operating Instructions For Use Manual Download Page 14

11

A8IFU.0001 REV C

Operating Instructions (continued)

3.1

START-UP SCREEN

Press the MAIN POWER SWITCH located on the Rear Panel 

of the device to the “ON” position. The device’s screen will 

illuminate. The START-UP SCREEN will appear.

To use the device for the first time and begin treatment 

immediately with Factory Default settings, press the 

orange START|STOP BUTTON. Proceed to 3.2 for further 

instructions to begin treatment.

If the device has been used before, press the orange 

START|STOP BUTTON. Treatment will begin immediately 

using settings that have been programmed previously.

To view or change settings before treatment, access the 

MAIN MENU SCREEN by pressing and holding down the 

SELECT BUTTON for 5 seconds. Proceed to 3.3.

3.2

START-UP SCREEN

NOTE: After selecting the number of sleeves for treatment 

the first time, the device will remember this selection. The 

user will not need to select the number of sleeves the next 

time they operate the device. To change the number of 

sleeves for treatment, the user must reset the device to 

Factory Default settings. Refer to the instructions in 3.10.

Press the UP 

 

or DOWN 

 buttons to move the arrow on 

the screen next to “1 Sleeve” for unilateral treatment with 

one leg or arm, or “2 Sleeves” for bilateral treatment with 

two legs or arms. Press the SELECT button to confirm your 

selection.

Treatment will begin immediately.    

3.3

MAIN MENU SCREEN

This is the MAIN MENU SCREEN

To select your therapy mode and adjust settings, press UP 

 DOWN 

 to scroll to THERAPY MODES. Press SELECT 

to confirm and proceed to 3.4

To view usage data, press UP 

 

or DOWN 

 to scroll to 

USAGE DATA. Press SELECT to confirm and proceed to 3.9.

To reset the settings on the device to Factory Default 

settings, press UP 

 

or DOWN 

 to scroll to RESET TO 

DEFAULT. Press SELECT to confirm and proceed to 3.10.

To begin treatment therapy, press UP 

 

or DOWN 

 to 

scroll to BEGIN TREATMENT. Refer to 3.2 for additional 

instructions to begin treatment.

AIROS MODEL 8

PRESS START/STOP TO

BEGIN TREATMENT NOW

SELECT # OF SLEEVES 

FOR USE IN TREATMENT 

 

1 SLEEVE

     2 SLEEVES

 

THERAPY MODES

  USAGE DATA

  RESET TO DEFAULT
  BEGIN TREATMENT

Summary of Contents for AIROS 8

































Reviews: