Airone AMADEUS 120, Instructions For Using, Maintaining And Installing

Page: 12 / 80

EN - 9
continuously for 3 seconds and then it will turn off, indicating the proper learning.
RADIO- CONTROL (Fig. 5)
The button ON/OFF on the hood turn on simultaneously lights and the motor at the second speed or it turns off every-
thing. After 100 working hours of the suction motor the red led will start to flash indicating the need to wash metals
filters. To cancel the filters alarm, when the suction motor is switched off, you must press button ON/OFF long
enough.
Radio control:
The hoods with the standard remote control are already configured.
For optional and/or replacement remote controls it is necessary to start the learning process. With the hood turned
off, keep button “ON/OFF” for 5sec. The remote control learning is indicated with the flashing alarm filters led. If
within one minute arrive a valid remote control code (sent by pressing any button of the remote control ) the led will
be on continuously for 3 seconds and then it will turn off, indicating the proper learning.
ROTARY CONTROL (Fig.6)
In the rotary control version there are three knobs:
> One knob for switching light decorative on and off
> One knob for switching lights on and off
> One knob for speed selection (1^,2^,3^,4^) and turning the motor off.
REMOTE CONTROL BUTTONS
> One button for turning the lights on and off.
> One button for turning on at 2nd speed and for turning the motor off.
> Two b and - for increasing and decreasing the motor speed. At the 4th
motor speed (intense) the led flashes and after 5 minutes the 2nd speed is automat-
ically set.
> A TIMER button for turning the motor off after 10 minutes.