Installation of your
LR50 Compressor Maintenance Kit
• Phillips Screwdriver
• Flat Head Screwdriver
• 7mm Nut Driver
• Small Pick Tool
Tools Required:
Step 1
Flip the compressor upside down.
Use a Phillips screwdriver to remove
the four screws holding down the
compressor cover. Save the screws
and lock washers.
Step 2
Use a flat head screwdriver to loosen
the seal of the gasket on the top
compressor cover. Gently pull up
on the bottom of the compressor
to separate. Flip the whole unit over
and remove the compressor cover
and set to the side.
Watch the installation video at
airmaxeco.com/InstallLR50
Warning:
Always unplug the
unit before any maintenance.
airmaxeco.com | 866-424-7629
2
