７
TIMER ON
TIMER ON BUTTON
TIMER OFF BUTTON
●
One press this key to enter into
TIMER OFF setup, in which case
the TIMER OFF icon will blink.
The method of setting is the same
TIMER OFF
as for TIMER ON.
●
Remote control
buttons of this control which are not available to this unit will not be described below.
This wireless remote control is universal, and it could be used for many units, some
Name and function of wireless remote control
Operation of wireless remote control
HEALTH BUTTON
●
Press this button, Health On or Health
Off can be selected.Health On is defaulted
while unit is turned on.
I FEEL BUTTON
●
Press this button once, to turn on the
I FEEL function, then the figure of "I FEEL"
will be displayed, after every press of
I FEEL
other function button, every 200ms to send
I FEEL once, after this function started,
the remote control will send temperature
to the main unit in every 10 minutes.When
repress this button, this function will be
turned off.
AIR BUTTON
●
Press this button, Air On or Air Off can
be selected.
●
Press this button to set swing angle,
which circularly changes as below:
OFF
This remote controller is universal.If it
receives threes kinds of following status,
the swing angle will remain original
.
If guide louver is stopped when it is
swinging up and down,it will remian its
present position.
indicates guide louver swings back and
forth in the five places,as shown in the
figure.
SWING UP AND DOWN BUTTON
Timer On setting: Signal “ON” will blink
and display, signal will conceal, the
numerical section will become the timer
on setting status. During 5 seconds blink,
by pressing
＋
or
－
button to adjust the
time value of numerical section, every
press of that button, the value will be
increased or decreased 1 minute. Hold
pressing
＋
or
－
button, 2 seconds later,
it quickly change, the way of change is:
During the initial 2.5 seconds, ten numbers
change in the one place of minute, then
the one place is constant, ten numbers
change in the tens place of minute at 2.5
seconds speed and carry. During 5s blink,
press the Timer
On
button, the
T
imer
On
setting
succeeds. The Timer On has been set up,
repress the
T
imer
On
button, the Timer
On
will be canceled. Before setting the
Timer, please adjust the Clock to the
current actual time.
