manualshive.com logo in svg

AirLive WT-2000ARM, User Manual, Page: 6 / 74

Share
Download
AirLive WT-2000ARM User Manual Download Page 6

1. Introduction 

 

1

                               

A

irLive WT-2000ARM User’s Manual 

1 

1. 

Introduction 

 

1.1 Overview 

Congratulations on purchasing this 802.11g Wireless LAN ADSL2+ Router. This router is a 
cost-effective ADSL2+ router, with the combination of an ADSL2+ modem, router, Ethernet 
network switch and wireless access point, you can surf the Internet through your ADSL2/2+ 
broadband connection without investing other devices. 

 

This router can support downstream transmission rates of up to 24Mbps and upstream 
transmission rates of up to 1Mbps. It supports PPPoA (RFC 2364 - PPP over ATM 
Adaptation Layer 5), RFC 1483/2684 encapsulation over ATM (bridged or routed) and PPP 
over Ethernet (RFC 2516) to establish a connection with ISP. The product also supports 
VC-based and LLC-based multiplexing. 

 

With the web management interface, users can easily configure the various functions of the 
router including DHCP server, NAT, virtual server, DMZ, access control, IP filter, Firewall, 
PPTP/IPSec/L2TP pass-through, DDNS, UPnP, Wireless and etc. 

 

This router is a high performance and high-speed device that provides a full rate of ADSL2+ 
standard with the superb reliability and a complete solution for home and office application.   

 

1.2 Firmware Upgrade and Tech Support 

If you encounter a technical issue that can not be resolved by information on this guide, we 
recommend that you visit our comprehensive website support at 

www.airlive.com

.  The 

tech support FAQ are frequently updated with latest information. 
 
In addition, you might find new firmwares that either increase software functions or provide 
bug fixes for WT-2000ARM.    You can reach our on-line support center at the following link: 
http://www.airlive.com/support/support_2.jsp 
 
Since 2009, AirLive has added the “Newsletter Instant Support System” on our website.  
AirLive Newsletter subscribers receives instant email notifications when there are new 
download or tech support FAQ updates for their subscribed airlive models.  To become an 
AirLive newsletter member, please visit: http://www.airlive.com/member/member_3.jsp 
 

Summary of Contents for WT-2000ARM











































































Reviews:

No comments