AirLive WT-2000ARM, User Manual, Page: 35 / 74

5. Interface Setup
AirLive WT-2000ARM User’s Manual
30

Bridge
Parameter Description
Encapsulation
Please check with your ISP the method of multiplexing. In Bridge
Mode, please select “1483 Bridge IP LLC” or “1483 Bridge IP
VC-Mux”.
5.2 LAN

Router Local IP
Parameter Description
IP Address
Enter the IP Address of the ADSL router for the local user to
access the router’s web page. By default, the IP Address is
192.168.2.1 .
IP Subnet Mask
Enter the Subnet Mask of the ADSL router. By default, the Subnet
Mask is
255.255.255.0 .
Dynamic Route
Dynamic routing allows routing tables in routers to change as the
possible routes change. This router supports RIP1, RIP2-B and
RIP2-M protocols for dynamic routing. After the RIP protocol is
selected, please choose the RIP direction from “None”, “Both”, “IN
Only” or “OUT Only”.
Multicast
Specify the method of transmitting data simultaneously to many
receivers. Please select “IGMP v1” or “IGMP v2” as the multicast
protocol or select “Disabled” to disable the function.