background image

 

1. Introduction 

The

 

AirLive

 

WL-5480USB 

(hereafter called USB adapter), compliant with IEEE 

802.11b/g, is a high-efficiency wireless adapter for wireless networking at home, in 
office, or in public places. This USB adapter connects directly to any USB-ready 
desktop/notebook computers, so that you can share files, printers, and high-speed 
access to the Internet over your existing wireless network easily, without 
disassembling your computer. 
 
The USB adapter has a data rate of up to 54Mbps, and can auto-negotiate to 54, 48, 
36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1Mbps to be compatible with any IEEE 802.11b/g 
device. 
 
The USB adapter is compatible with Windows 98SE/ME/2000/XP and can be used in 
either 

Ad-hoc mode 

(computer-to-computer, without a wireless router) or 

Infrastructure mode 

(computer-to-wireless router, a wireless router is required).

 

 

1.1 Features 

 

With the IEEE 802.11g 2.4GHz (OFDM) standard   

 

High data transfer rate - up to 54Mbps 

 

Supports 64/128/256-bit WEP and WPA data encryption security 

 

Supports peer-to-peer communication among any wireless users, no Access Point 
required 

  Automatic fallback increases data security and reliability 

  Supports the most popular operating systems: Windows 98SE/ME/2000/XP 

  Portable and mini-size design 

  Suitable for any notebook or desktop PC

 

 

1.2 Package Contents 

 

Before you begin the installation, please check the items of your package. The 
package should include the following items:   
 

 

One 

AirLive

 

WL-5480USB

 Adapter 

 

One USB Extension Cable 

 

One Quick Installation Guide 

 

One Driver & Utility CD (with User’s Manual) 

 
 

If any of the above items is missing, contact your supplier as soon as possible. 

 

Summary of Contents for WL-5480USB




























Reviews: