26
For Windows 98SE/ME
Step 1
Go to
Start
,
Run
, type
winipcfg
and click
OK
.
Step 2
Select the adapter from the drop-down menu and click
Release
.
Step 3
After the IP address is released, click
Renew
. You should get an IP address
like
192.168.x.y
(where
x
and
y
are unique numbers assigned by your wireless
router/access point). If you don’t get an IP address, reset the wireless router/access
point and then try
Renew
again.
For Windows 2000/XP
Step 1
Go to
Start
,
Run
, type
cmd
and click
OK
.
Step 2
At the command prompt, type
ipconfig/release
and press
Enter
.
Step 3
After the IP address is released, type
ipconfig/renew
and press
Enter
. You
should get an IP address like
192.168.x.y
(where
x
and
y
are unique numbers
assigned by your wireless router/access point). If you don’t get an IP address, reset
the wireless router/access point and then try
ipconfig/renew
again.
E.
You must have USB 2.0 compatible hardware and install the latest USB 2.0 driver
from Microsoft in order to reach the data transfer rate of 54 Mbps. If your hardware is
not USB 2.0 compatible or you don’t have the latest USB 2.0 driver installed, you will
not reach 54 Mbps.
Summary of Contents for WL-5480USB
Page 1: ...1 WL 5480USB Wireless USB Adapter User s Manual ...
Page 19: ...19 ...
