4.2.2.2 Alarm sending
Set to send the mail with connection to the alarm detection by the external sensor input or by the built-in motion
detection function.
Alarm sending
：
Select
On
to set to send mail with connection to the alarm detection.
File attachment
：
Set whether an image file is attached to the mail sent or not. When
On
is selected, the image
file made by the settings below is attached. When
Off
is selected, only the message is sent.
Image file name
：
Type the file name you want to assign to the image to attach a mail. You can use up to 10
alphanumeric, - (hyphen) and _ (underscore) for naming.
Suffix
：
Select a suffix to add to the file name:
None:
No suffix is added. The Image file name is assigned to the image to be sent via an e-Mail.
Date & time:
The date & time suffix is added to the Image file name. The date/time suffix consists of lower
two-digits of year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minute (2 digits), second (2
digits), and consecutive number (2 digits), thus 14-digit number is added to the file name.
Sequence number:
A consecutive number of 10 digits between 0000000001 and 4294967295 and two
fixed digits 00 is added to the Image file name.
Motion Detection
：
Click it on for using
Motion Detection
function as a sensor. You can set the motion detection
function page.
Note
：
•
Motion Detection
works only when the Video mode is set to
MPEG4
and the
Cropping
is set to
Off
.
Alarm Buffer
：
Select
Use alarm buffer
when you forward the image/ audio of before and after the alarm
detection (pre-alarm, post-alarm). If you do not select it, only the image of the moment of the alarm detection is
forwarded. Click
Alarm buffer
to display the Alarm buffer setting menu. For details, see “Setting the Alarm
AirLive POE-200CAM User’s Manual
33
