• During transmission of an image file via mail, the frame rate and operation performance of the monitor
image of the main viewer decline.
• While the camera video mode is set to
MPEG4
, the image of the composite video signal output from the
video output connector of the camera may be distorted during mail transmission.
• You cannot send an audio file by using the mail sending function.
SMTP server name
：
Type the SMTP server name up to 64 characters, or the IP address of the SMTP server.
Authentication
：
Select the authentication required when you send an email.
Off:
Select if no authentication is necessary when an email is sent.
On:
When authentication is necessary an e-mail is sent, select one of the authentication methods from the
followings.
SMTP:
Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP:
Select if POP before SMTP authentication is necessary when an e-mail is sent.
Note
：
• When you set to
On
, be sure to select either or both
SMTP
or/and
POP before SMTP
.
POP server name
：
It is necessary when the
POP before SMTP
is selected in
Authentication
. Type the
POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server which sends e-mails performs authentication using the POP
user account.
User name, Password
：
Type the user name and Password of the user who has the mail account. This
setting is necessary when the SMTP server which sends e-mails performs authentication.
Recipient e-mail address
：
Type the recipient e-Mail address up to 64 characters. You can specify up to
three recipient E-mail addresses.
Administrator e-mail address
：
Type the Administrator e-Mail address up to 64 characters. This address
is used for reply mail and sending system messages from the SMTP server.
Attached File Type:
Select to attach the file as JPEG or MPEG4.
Subject
：
Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is sent
according to the alarm detection when
Alarm sending
of the alarm tab is set to
On
, the characters
standing for the sensor type added to the subject.
Message
：
Type the text of the E-mail up to 384 characters. (A line break is equivalent to 2 characters.)
AirLive POE-200CAM User’s Manual
32
