AirLive Ether-FSH2402NT User
’
s Manual
10
9
LED Indicators
Refer to the next chapter
Understanding LED Indicators
for
detailed information on the meaning of each LED indicator.
9
10/100BASE-TX Twisted-Pair Ports (Port1~24)
These ports supports network speeds of either 10Mbps or
100Mbps, and can operate in half- and full- duplex transfer
modes. These ports also supports automatic MDI/MDI-X
crossover detection function gives true “plug and play” capability,
just need to plug-in the network cable to the hub directly and no
need to care if the end node is NIC (Network Interface Card) or
switches and hubs.
9
1000BASE-T Twisted Pair Ports (Port 25~26)
The Switch is equipped with two Gigabit twisted pair ports,
supported auto negotiable 10/100/1000Mbps and auto
MDI/MDIX crossover detection function. These two ports can
operate in half- and full- duplex modes.
Rear Panel
Figure 5. The rear panel of the Switch
9
AC Power Connector
This is a three-pronged connector that supports the power cord.
Plug in the female connector of the provided power cord into this
connector, and the male into a power outlet. Supported input
voltages range from 100-240V AC at 50-60Hz.
