31
AirLive ARM-201E / 204E User’s Manual
PPPoA/PPPoE:
Select this option if your ISP requires you to use a PPPoE connection. This option is typically
used for DSL service. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE
connection. Selection Static PPPoE to use static IP address for your PPPoE connection. Please enter the
information accordingly.
Username:
Enter your username for your PPPoE/PPPoA connection.
Password:
Enter your password for your PPPoE/PPPoA connection
Encapsulation:
For both PPPoE/PPPoA connections, you need to specify the type of Multiplexing,
either LLC or VC mux.
Connection Setting:
For PPPoE/PPPoA connection, you can select Always on or Connect on-demand.
Connect on demand is dependent on the traffic. If there is no traffic (or Idle) for a pre-specified period of
time, the connection will tear down automatically. And once there is traffic send or receive, the
connection will be automatically on.
IP Address:
For PPPoE/PPPoA connection, you need to specify the public IP address for this ADSL
Router. The IP address can be either dynamically (via DHCP) or given IP address provide by your ISP.
For Static IP, you need to specify the IP address, Subnet Mask and Gateway IP address.
Bridge Mode:
The modem can be configured to act as a bridging device between your LAN and your ISP.
Bridges are devices that enable 2 or more networks to communicate as if they are 2 segments of the same
physical LAN. Please set the Connection type.
