manualshive.com logo in svg

AirLive AIRLIVE WL-5430AP, User Manual, Page: 32 / 36

Share
Download
AirLive AIRLIVE WL-5430AP User Manual Download Page 32

 

 
 
Table 20: AP Setup (Continued)

 

 

Field 

 

Description 

 

Operation Mode 

Selects Ad-Hoc or Infrastructure mode   

Channel   

Selects the channel (Ad-Hoc network only)   

Security   

Selects the option to disable security or to use WEP or WPA 
security. If using WEP or WPA, click the Setup button to enter 
the key(s).   

Preamble Type   

Selects short or long preamble   

Transmit Rate   

Selects the transmit rate: a fixed rate or Auto   

 

10.2 MAC Cloning 

 
To enable MAC cloning mode, go to the MAC Cloning field on the LAN page and select 
Enabled. MAC cloning clones all the MAC addresses of the devices connected to the Ethernet 
(wired) port to a single MAC address sent out wirelessly to an AP or Repeater. 

 
10.3 Client Mode — Site Survey 
 

Clicking the Site Survey button brings up the Site Survey page, which displays the available 
Access Points and Ad-Hoc networks in the neighborhood. The user then selects the AP or 
Ad-Hoc network to join. Figure 22 and Table 21 describe the options

.

 

 
Figure 22: Client Mode — Site Survey 

 

Summary of Contents for AIRLIVE WL-5430AP





































Reviews:

No comments