4. Wireless Settings
4.6 WPS
Wireless Settings -> WPS
Disable WPS
: Check the box to disable the WPS function, default setting is
enabled.
WPS Status
: Here shows the current status of the WPS function. Default setting is
configured; click
Reset to UnConfigured
to re-configure the WPS connection.
Self-PIN Number
: Here shows the 8-digit numbers PIN code of the router itself.
Enter the Self-PIN Number to client (Registrar) end and click the PIN button at the
client end to make a WPS connection. It will connect with the wireless router within
two minutes and get IP address.
Push Button Configuration
: Click
Start PBC
button (or press the physical WPS
button on the Wireless Router once), meanwhile, the client should also click the PBC
button simultaneously within 2 minutes.
Client PIN Number
: Enter the client (Enrollee) PIN code into the blank field then
click the
Start PIN
button to make a WPS connection with client. Then, the wireless
router will connect to client within 2 minutes and get IP address
33
AirLive AC.TOP User’s Manual
