12
Note :
1. The
Channel
of Repeat AP should be the same with Main Base Station.
2. To verify wireless clients can associate ESSID “Repeater_Main_AP” with WEP key.
3. To verify wireless clients can use ping command to “192.168.2.254”.
4. If you can not access Main Base Station, verify the IP address of the wireless client (PC or Laptop) is in the same subnet
with Main Base Station.
8. Set Wireless client associate to ESSID
“
Repeater_Main_AP
” with corrent WEP key.
9. Click
Status->Client
, the
Repeater AP
Clients
should be display.
3. Select the desired
Security Type
.
4. Select the
Authentication
Type
for WEP.
5. Select WEP Key Index and Key, then click
Finish
. Make sure to copy down the
encryption key.
7. Click
Status->Remote AP
, the
Connection
Information
should be display.
6. Wait
35
seconds while the Access Point
reboots.
