35
Enter a
MAC Address
, then the
Save
button to create a list of PCs that can
communicate with the AP.
Note
: Each MAC address should be entered in this format: xxxxxxxxxxxx ("x"
represents the actual characters of the MAC address).
Click
Apply
to save the changes.
If you want to block specific PCs from communicating with the Access Point, set Access
Control to
Reject
. Enter a
MAC Address
, then click the
Save
button to create a list of
PCs that cannot communicate with the AP.
Note
: Each MAC address should be entered in this format: xxxxxxxxxxxx ("x"
represents the actual characters of the MAC address).
Click
Apply
to save the changes.
