QUICK REFERENCE & SAFETY WARNINGS
High pressure spray can cause extremely serious injuries such as amputation.
Handle the spray gun as you would a loaded firearm!! Read and understand all instruction manuals, tags,
warnings, users guides & labels supplied with the spray gun, airless pump, hoses, spray tips & any other
attachments before operating equipment.
Learn & follow “Pressure Relief Procedure” of the equipment in use. Never attempt to change or clean the
spray tip or service unit & gun without first releasing pressure. If “Pressure Relief Procedure” is not known,
contact pump manufacturer for instruction.
Never leave pressure in the system while not in use.
Airlessco spray guns are designed for use with Airlessco spray tips only.
If any other attachments are used, the spray gun is considered to be modified and safe operation is now
limited to the safety of the attachment.
For safe renting of airless equipment, use rental instructions, warnings and forms supplied by airless
pump manufacturer
Be sure that all safety devices are operating properly before each use.
MAJOR COMPONENTS OF SPRAY GUN
AND REVERSIBLE SPRAY TIP
SPRAY TIP ASSEMBLY
1.
Be sure the pressure relief procedure is followed
before assembling tip and housing to the gun.
2.
Insert REV-TIP™ cylinder into REV-GUARD™
(guard housing assembly).
3.
Guide the metal seat into REV-GUARD™ (guard
housing assembly) through the retaining nut and
turn until it seats against the cylinder.
4.
Insert the O-ring gasket onto the metal seat so
that it fits into the grooves.
5.
Finger tighten the REV-GUARD™ retaining nut
onto the gun.
6.
Turn guard in the desired position.
7.
Completely tighten the retaining nut.
Reverse to
Unplug
TO REMOVE CLOGS FROM SPRAY TIP
Spray Position Shown
1.
Lock gun trigger.
2.
Turn REV-TIP™ handle 180 degrees.
3.
Disengage trigger lock and trigger gun into pail.
4.
If the REV-TIP™ handle appears locked (resists turning),
loosen the retaining nut. The handle will now turn easily.
5.
Engage trigger lock and return handle to the spray position.
SPRAY GUN
Attach spray gun to airless hose &
tighten fittings securely.
The trigger lock should
always be set (locked)
when the gun is not
being triggered.
Cut along line and keep handy for Quick Reference
8
TRIGGER
LOCK
e
d
UNLOCK
LOCK
Reversible
Spray Tip
Tip Guard
(REV-GUARD™)
Trigger
Guard
Handle
(filter inside)
Trigger
Lock
#
#
RETAINING
NUT
Warnings Continued on Reverse
