SAVE THESE INSTRUCTIONS
www.airkinglimited.com
3032730 Rev. E 10-17
1 of 8
Drum Fan
Models: 9236D, 9936D, 9942D,
9236C, 9936C, 9942C
Read all instructions before using this Fan.
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed
to reduce the risk of fire, electrical shock and injury to persons, including the following:
DO NOT
use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints,
gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the
containers for these products!
ALWAYS
be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the outlet
and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this condition
should be replaced by a qualified electrician.
ALWAYS
unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole means
of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and unplug the
Fan when not in use.
BE CERTAIN
that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source.
The power cord is equipped with a three-prong grounded plug that must be inserted into a matching receptacle. Under no
circumstances should the grounding prong be cut off the plug. Where a two-prong wall receptacle is encountered, it must be
replaced with a properly grounded three-prong receptacle installed in accordance with the National Electrical Code (NEC) and
all applicable local codes and ordinances. This work must be done only by a qualified electrician, using copper wire only.
DiSCARD pRODUCT iF ThE ATTAChmENT pLUg iS DAmAgED. TO REDUCE ThE RiSk OF FiRE, ELECTRiC ShOCk AND pERSONAL
iNjURY, DO NOT REmOVE, REpLACE, REpAiR OR TAmpER WiTh ThE ORigiNALLY SUppLiED pLUg. iF ThE FAN DOES NOT
FUNCTiON pROpERLY, iT mAY bE DUE TO ThE SAFETY DEViCE iNCORpORATED iN ThiS pLUg.
REDUCE ThE RiSk OF FiRE OR ELECTRiC ShOCk - DO NOT USE ThiS FAN WiTh ANY SOLiD STATE SpEED CONTROL DEViCES.
DO NOT USE A ThREE-pRONg TO TWO-pRONg ADApTER. impROpER CONNECTiON mAY CREATE ThE RiSk OF
ELECTRiCAL ShOCk. USE OF SUCh ADApTERS iS NOT pERmiTTED iN CANADA.
WARNiNg: DO NOT DEpEND UpON ThE ON-OFF SWiTCh AS ThE SOLE mEANS OF DiSCONNECTiNg pOWER WhEN iNSTALLiNg
OR SERViCiNg ThE FAN. ALWAYS UNpLUg ThE pOWER CORD.
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK - DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED
CONTROL DEVICES.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
•
AVOID
the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these devices
may overheat and cause a fire hazard.
•
DO NOT
route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire hazard.
•
ALWAYS
place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
•
NEVER
insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
•
DO NOT
block, cover or obstruct air flow to or from the fan while in operation.
•
DO NOT
use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location may
create a shock hazard.
•
DO NOT
route power cord in or through areas such as doorways or where the cord may be damaged or create a tripping hazard.
•
NEVER
use a single extension cord to operate more than one Fan or other electrical device.
•
DO NOT
use this Fan in a window. Rain may create an electrical hazard.
•
DO NOT
use this Fan if it has been damaged or is not functioning properly.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008)
.This Fan is not suitable for use in agricultural facilities
including areas where livestock, poultry or other animals are confined. please refer to National Electric Code (NEC) Article 547-7 (2008), or
applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
•
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008)
.This Fan is not suitable for use in hazardous locations.
please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical requirements
for hazardous locations.
WARNING
WARNING
CAUTION
IMPORTANT INSTRUCTIONS - OPERATING MANUAL
