Airistar
®
100GT Control Panel
Describes the controls for the Airistar 100GT air purifier
The Airistar 100GT includes adjustments to control the airflow.
1. Move the levers on the grill of the diffuser toward the outside to increase
airflow and toward the center to reduce airflow.
2. Toggle the green switch on the control panel to turn the blower on or off.
3. The speed control knob can be set to High (H); Low (L) or Off (O).
AF302-1
AF303-1
AF304-1
12 (Monthly)
2 (6 Months)
4 (3 Months)
12 (Monthly)
1 (Annual)
2 (6 Months)
Pre-Filter
Melt-Blown Fiber Filter(MBF)
Activated Carbon Filter
Follow the procedures below whenever you replace any of the filters.
1) Turn off the unit and disconnect it from all sources of
electrical power.
2) Allow the blower to stop fully.
3) Put gloves on for your protection.
4) Unlatch and open the filter door of the unit.
5) Pull the filter frame straight out of the unit by the handle.
6) Remove filters and place in garbage bag for disposal.
7) Place new filters in unit referring to the diagram on the
following page.
8) Place the filter frame back in the unit with the arrow
facing to your left.
9) Close and re-latch the filter door.
10) Reconnect electrical power and turn unit on.
11) Thoroughly wash / sanitize hands after proper disposal of
soiled filters.
10
5
