manualshive.com logo in svg

AIRIS PRAXIS N1212, User Manual

Share
Download
AIRIS PRAXIS N1212 User Manual Download Page 30

                                 

■

 chapter 1 getting to know the basics                  

 

 

1-21 

DVB-T Digital Video Broadcast TV (Optional Device)

 

The optional DVB-T (Digital Video Broadcast – Terrestrial) module 

allows you to watch high-quality digital video broadcast TV on your 

notebook computer. 

If your system has the DVB-T option, you should plug the antenna 

into the connector.   

 

 

You may have to move the antenna close to the window and away 

from the building for best reception.   

 

If this is the first time you use the DVB-T module to watch TV, you 

need to scan the available channels first. Follow the steps below to 

scan the channels. 

 

 

1.    Launch 

NewSoft Presto!PVR

 application. Click 

 to 

open the Settings dialog box, and then click the Device tab.

 

2.    Choose the DVB-T tuner on the Device list. 

Summary of Contents for PRAXIS N1212















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands