manualshive.com logo in svg

AIRIS PRAXIS N1212, User Manual

Share
Download
AIRIS PRAXIS N1212 User Manual Download Page 12

                                 

■

 chapter 1 getting to know the basics                  

 

 

1-3 

receive digital entertainment services on your notebook 
computer via the 3G telecom networks. 

 

„

 

ExpressCard Technology 

ExpressCard (type I, 34mm) is the next-generation of the 
PC Card standard. The bus interface is based on the two 
standards: PCI Express for high-performance I/O and 
USB2.0 for variety of devices. 

 

„

 

Expandability 

The system offers upgradeable hard disk drive and 2 DDRII 
SDRAM sockets for expansion, allowing the user to easily 
increase the storage and system capacities as the need 
arises. 

 

„

 

Built-in Multiple Card Reader 

There is built-in 4-in-1 card reader to access many of the 
portable media formats (SD Card, MS Card, MMC Card, 
and MS-Pro Card).   

 

„

 

Gigabit Ethernet Port 

The system provides built-in 10/100/1000Mbps Ethernet 
network adapter for high bandwidth network connection. 

 

„

 

Firewire (IEEE1394 / 1394a) and USB2.0 ports 

In addition to a full array of built-in I/O por

t

s, the computer 

offers IEEE1394 for ultra high-speed connection to high 
bandwidth digital video devices and USB2.0 ports to 
connect to any USB-based peripheral devices. 

 

„

 

Wireless LAN

 

The internal Wireless LAN module allows your notebook to 
connect wirelessly to other 802.11-enabled systems, 
devices, or network. 

Summary of Contents for PRAXIS N1212















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands