AIRIS ASP01S, User Manual

Page: 11 / 84

- 11 -
OPERATION
Vacuum cleaning
Before using the device first roll out a sufficient length of electric flex cable and plug into
the mains socket. The yellow mark on the electric flex cable is the maximum length that
must not be exceeded.
To switch on the device press the foot pedal button on the casing with your foot.
Pull the device behind you like a sledge when working with
it.
Important!
In a few cases there may be a “whistling” sound
at the start. This is not a fault and the sound
goes away after a time.
Do not suck up toner, plaster, cement, stone dust
or drill dust. The sucking up of these materials
blocks the filter.
Regulating the suction power
You can set the suction power on the device individually as you
require it using the suction regulator. We recommend using
minimum suction power for delicate materials.
Select medium suction power for mattresses, upholstered
furniture and carpets. Select maximum suction power for tiled,
wood and other robust floors.
Secondary air valve
The secondary air valve is at the handle
z Opening: pull upwards
z Closing: push downwards
You can adjust the suction power by using the secondary air valve.
The wider the secondary air valve is opened, the less the suction
power and vice-versa. Open the secondary air valve to prevent
curtains and the like from being sucked in.
Choose:
z
Minimal suction power for curtains and sensitive materials.
z Medium suction power for upholstery cushions, mattresses, carpet floors.
z Maximum suction power for tiled, wooden and robust floor surfaces with heavy
soiling.
After vacuum cleaning
Switch off the device when you have finished cleaning:
1. To do this press the foot button on the device with your foot of by hand.
2. After this pull the mains plug from the socket.
3. To roll in the cable press foot pedal and hold it in position. The cable will be