11
Zone control
4 ZONE
To turn On/Off the zone dampers:
Press & hold MENU button for 2 seconds, Display shows ZONE.
Press A, B, C or D button(s) to turn on/off any particular zone(s), Display shows the active zone(s).
Note:
To exit press the MENU button again or if no button is pressed exit occurs within 15 seconds.
Enhanced features
Following is an enhanced features instruction that the user has to enter into Menu window.
Enter into Menu
Press MENU button to display the menu. Using
or
button to move the cursor.
Clock setting
Move cursor to
position and then press MENU button.
Press
or
button for Hour setting.
Use
or
button to enter the Minute setting and then press
or
button for setting.
Use
to enter the Day setting and then press
or
button for setting.
Note:
If Timer on/off is set, there will be no Clock display.
Timer on
Move cursor to
ON
position and then press MENU button.
Press
or
button for HOUR setting.
Use
or
button to enter the MINUTE setting and then press
or
button to set.
Note:
To cancel is by pressing POWER button while in this setting mode.
Timer off
Move cursor to
OFF
position and then press MENU button.
Press
or
button for HOUR setting.
Use
or
button to enter the Minute setting and then press
or
button to set.
Note:
To cancel press POWER button while in setting mode.
Zone control
Move cursor to ZONE position and then press MENU button.
Press A, B, C or D button(s) to turn on/off any particular zone(s), Display shows the active zone(s).
7 Day program
The system can be programmed to turn on/off 5 + 2 or 7 day basis.
Move cursor to 7 DAY position and then press MENU button.
Use
or
button to select 5, 2 or 7 day setting and then press MENU button.
Use
or
button to enter the Timer on/off, Hour/Minute setting and then press
or
button for setting.
Note: -
If 7 Day program‟s Timer on/off is set, the LCD shows “7 DAY”.
- To cancel press the POWER button while Timer on/off 7
Day program mode. The LCD does not show “7
DAY”.
- To override is by pressing
button at the same time. The LCD shows “7 DAY” is blinking.
- To deactivate the override press the
button at the same time.