14
The art of purifi cation
®
15
The art of purifi cation
®
IR
Control Panel details: right hand side
1. Timer: Press this button to set the timer for up to 12 hours of continuous operation. The time left
displays on the left hand side of the panel.
2. Auto: When you select auto mode, your unit will automatically change to the optimum speed
when to raise or lower fan speed depending on the amount of particles in the room.
button and hold down for 3 or more seconds to set the panel on Sleep mode. Press Auto button
again and hold down for 3 or more seconds to turn the LCD back on.
3.
Note:
the button is disabled to prevent the accidental press of the button.
4. Power/Speed: To turn the system on, rotate knob to select a speed from 1 to 5. The light indicator
for the selected speed will display as blue and the speed you selected will display on the left
1
2
3
4
5
5. IR: This infrared receiver is used by your remote control to change unit settings
The default setting for the unit is moderate and will be displayed as 4 bars on the control panel. This
setting should meet most needs.
For advanced users only:
1.
2. Press and hold “Auto” button for more than 5 seconds. You will hear a “ding” sound, the Control
Setting bars will go from High, Moderate, Low, Moderate....... and then start blinking.
3. If you release “Auto “ button when “High” is blinking, the system is set to High Mode.
Answer the following questions to see if you need to change your setting.
Auto Mode: Your system will start on high to purify the air until it senses an extremely low
concentration of particles and then auto change itself to the low setting.
If you answered “Yes” to any of the questions above, you may want to consider changing your
setting to “High”. If you answered “No”, answer the following question.
If you answered “Yes” to this question, you may want to consider changing your setting to “Low”.
Control Setting
Are you noticing severe indoor air pollution problems?
Are you or a member of your family having severe asthma and/or allergy issues?
Do you want to able to always set your system to Auto mode?
Yes No
Do you have a clean environment and purchased the unit for general air
Yes No
