FUNZIONAMENTO
I
71
CLEANING AND MAINTENANCE
GB
71
OPERATION
These errors appear on the cooking top display.
Error code
Description
Possible causes
Solution
C, E, C flashing, E flashing
or
- symbol
If the display in one of
the cooking zones shows
one of these symbols, an
intervention has occurred
or is occurring in the
system’s basic
configurations.
Problems or changes
detected to the system’s
basic configurations.
Contact the authorised
service centre, specifying
the error code.
E2
Excessive temperature on
the cooking zone.
Overheated pot.
Allow the system to
cool down, decreasing
the power or removing
the pot.*
E3
Malfunction due to the
use of inappropriate
cookware materials.
Pots of inappropriate
material or
possible loss of magnetic
properties at higher
temperature.
Use pots of a suitable
material or replace them.*
E4, E5, E6, E7, E8, E9, EA,
EC, EH,
Hardware fault
Hardware errors detected
Contact the authorised
service centre, specifying
the error code.
No display / Function
Voltage or touch control
error.
Faulty electrical
connection or faulty
component.
Contact the authorised
service centre, specifying
the error code.
u
Pot not detected
Inappropriate
cooking pot
Use a suitable pot. Refer to
the section of the manual
on suitable recipients.*
Er31, Er47, Er22, Er20
or segments on the
display lighting up
cyclically
Touch control fault
Touch control error
detected
Contact the authorised
service centre, specifying
the error code.
TABLE OF COOKING TOP ERRORS
