EN
8
www.airfonix.com
T Series model AFX-19PT002
Top
Bottom
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ANTENNA:
Included external antenna attaches into this SMA jack.
PWR LED:
Lights green when powered on and red in standby mode.
PWR BUTTON:
Press to switch between standby mode and to power ON.
VOLUME
+
and VOLUME
–
BUTTONS:
Press to increase or decrease volume.
MUTE LED:
Lights red when mute mode is on.
MUTE BUTTON:
Press to mute or unmute audio.
SPDIF and AUX LED:
SPDIF LED lights green when audio source connected to SPDIF input source is
powered on and selected. AUX LED lights green when audio source connected to the left and right
RCA inputs marked AUX input OR the Balance In inputs and is powered on and selected.
SOURCE BUTTON:
Press to switch between SPDIF and AUX sources.
IR SENSOR:
Receives infrared signal from remote control.
LINK LED:
Lights green when units are linked. Blinks green while sending pairing signals (see page 13).
EXT IR:
Connects included IR extender.
SPDIF:
Use supplied optical cable or (coaxial cable not included) to connect this digital input jack
with optical or digital output in your HDTV.
BALANCE IN L and R:
Connects to an audio source using XLR audio cables.
AUX L and R:
Connects to an analog audio source using RCA cables.
Setting OFF/ON:
Used to pair units and set zone codes. See pages 12 and 13 for more information.
DC IN 9V:
Used to connect supplied 9V AC adapter to an AC power source.
Overview AFX-19PT002 Transmitter
AUX
L
R
BALANCE IN
R
L
SPDIF
DC IN
9V
Setting
OFF
ON
12
13
14
15 16
MUTE
VOLUME
+
LINK
IR
SOURCE
AUX
SPDIF
PWR
EXT
IR
2
1
3
4
6
7
8
9
10
5
11
IMPORTANT:
To prevent signals mixing together, do not connect source to both the AUX L and R RCA
•
jacks and the BALANCE IN sockets simultaneously.
When connecting an audio source using the SPDIF input, it must use either 44.1KHz or
•
48KHz sampling rates. Check the owner’s manual for your audio source if you are unsure.
!
