EN
15
www.airfonix.com
Placement and Mounting Options
Mounting to Speakers or Walls
These units are designed to easily adapt to any location. Either lay them on a flat surface or use the
included accessories to stand or mount vertically.
Rest the unit face down and place one of the mounting brackets
facing the bottom on the back of the unit. Line up holes in the
bracket with holes in the unit. Use a Phillips screwdriver to secure
bracket with four 1/4” included screws.
Using the Stands
Fit each of the two included stands into the outside slot on each
side of the bottom of the unit.
The unit sits vertically on a flat surface.
NOTE:
The mounting brackets are identical. One is installed facing down to interlock with the other.
NOTE:
The stands are identical. One fits into the slots on the bottom
left side of the unit and the other fits into the bottom right side.
Slide unit onto bracket attached to wall or speaker, making sure the
top of the bracket fits into the bottom bracket.
Place the other bracket face up a 1/2” from desired placement
position on wall or speaker. Using the bracket as a template, mark
the holes with a pencil. If necessary, use a drill to drill holes and use
a Phillips screwdriver to secure bracket with four 1” included screws.
4x
1” Screw
4x
1/4” Screw
