WARNING:
The appliance is not intended for use by children
or infirm persons without supervision.
Children should be supervised to ensure they do
not play with the appliance.
Appliance intended to be mounted on external
window only.
NOTE: SHUTTER OPERATION
Do not turn auto-switched models on without
the front cover fitted. Auto-Switched fans are
fitted with a thermal actuator, thus requiring
approximately three minutes to fully open and
approximately 60 seconds to close shutters.
Pull-cord models are operated either by the built
in pull-cord and/or separate switch (thermal
actuator). If it is decided to use and operate fan
via a separate switch, the delay on opening and
closing of shutters must also be noted.
Fig. C
7105A Connection Diagram
7107A Connection Diagram
6.
Place cover assembly as shown, over fan
assembly and tighten retaining screw. Test.
Ready to go.
HOLE CUT-OUT TEMPLATE
HOLE CENTRE
Ø
230mm
External
isolating
switch
External
isolating
switch
Pull-cord
switch
Cover
assembly
Retaining
screw
© Clipsal Australia Pty Ltd
7105A
Auto Switched
& 7107A
Pull-Cord Switched
MaxAir Window Exhaust Fan
Installation Instructions
