4
1 .
S t o r a g e a n d t r a n s p o r t
●
The appliance may only be stored in dry, covered places with ambient temperature between -
25 °C and +55 °C in such a manner so as to keep the surfaces that will be in contact with
transported air weather-protected, dry and clean.
●
The packaging may only be removed immediately before the installation of the appliance in its
final position. Otherwise it is necessary to check all parts for cleanliness before installation and
clean the parts carefully if needed.
●
The equipment must contain no operating fluids (e.g. water in heating or cooling coil) during the
storage and transport.
●
The appliance may only be transported when positioned on transportation racks (supplied as
standard). The appliance must be protected against mechanical damage and leaking water during
transportation and prior to completing the appliance assembly. All holes must be covered with
protective lids. The same applies when the appliance is transported disassembled.
●
Secure the equipment against falling during the transport. Also, the transport method should
prevent risk of falling or loosening the equipment.
●
It is prohibited to carry out activities such as grinding, welding, cutting and other ancillary works
near the unit that could irretrievably damage the surface or individual parts of the unit.
It is necessary to fasten the unit safely prior to any manipulation or transport of the unit. Secure the
unit and its accessories against falling down or tipping over.
1.1.
Transport of compact units, roof assembly
Compact units are understood as units that are placed in one compact casing.
The only manipulation methods allowed
Transport of the unit by crane, roof assembly
> 1900mm
> 1000kg
> 1900mm
> 1900mm
4x
1
2
3
1 2
3
