USER
AND MAİNTENANCE MANUAL
www.airflow.com
3
1. WARNINGS
&
SAFETY INFORMATION
Install this product in an environment where the temperature ranges fro
m 0 °C to +40 °C and the relative humidity
is less than 80%. If condensation is expected to form, heat up the fresh outside air by a duct heater etc.
This unit is designed for the indoor
installation only
,
it is not suitable
for outdoor
installation
.
It is recommended that no p
ackaging should
be removed until
the unit reaches the installation point so that no damage
occurs on the unit. Select an adequately sturdy position for installing the product and install it properly and securely.
This unit
must only
be used
and installed
according to
the installation, user and maintenance manual.
(Otherwise
all guarantees and warranties will be void.
)
Electric supply to unit should be isolated before performing any maintenance or repair work.
Any work on the unit apart from basic maintenance should be carried out by a suitably qualified person.
It is recommended protective gloves to be worn during
installation.
Only original manufacturer replacement on spare parts should be used.
Unit should not be operated without all external panels in place.
Do not touch the hot surfaces during the operation of the unit.
This product must not be disassembled under any circumstances. Only authorized repair technicians are qualified
to conduct disassembly and repairs.
Perform the preliminary inspections before starting-up the unit.
By not following these instructions when carrying out routine maintenance of the unit
may result in damage to
the unit and/or
injury of
the operator.
D
irty filters should be placed in a
sealed container
and be destroyed in compliance
with local solid waste
procedures.
C
are should be taken to not damage the fans when cleaning. It is recommended that a soft brush or vacuum cleaner
to be used.
Please read this important safety information before
proceeding to the manual.
