How to Install
A. Linking up the tube and the
Vacuum cleaner:
Insert the tube connector into the
cleaner and then rotate it clockwise until
it locks.
To disconnect: Simply rotate it
counter-clockwise
.
B.
To use
the blowing
function
:
Insert the main suction pipe
into the blowing port then rotate it
clockwise until it locks.
C. Connecting hand lever and
long link pipe:
Contact joint: insert one end of the
tube into the long link pipe's inside
diameter, then rotate it clockwise until
it's tight.
To disconnect: Hand both ends of
the long link pipe, rotate it
counter-clockwise until it's out.
