PAGE: 3 / 4
F A N C O
101227
Install bulbs (included). See relamping label
at socket area or packaging for maximum
allowed wattage.
Fig.21
Turn ON the electric power at the main fuse
or circuit breaker box.
The slide switch sets the direction of fan rotation. Select the direction of fan rotation you need by sliding the switch.
Push the slide switch left for " Forward" and right for "Reverse".
CAUTION: If you install a Remote Control or a Wall Control for this fan, make sure to use the pull chains to
select the "high" position for the fan speed and the "on" position for the fan light.
Fan Speed Pull
Chain
Fan Light Pull
Chain
Slide Switch
Reverse
Forward
Fig.20-a
Fig.20-b
Fig.19-b
Fig.19
Fig.18
Install the glass shade, rubber
washer and metal washer
upward through the nipple and
secure with hex nut. Then
attach the cover to the glass
shade and secure it with end
cap.
Take care to align the holes on
the glass shade and the end
cap, so that the pull chains
pass through and move freely.
Glass Shade
Fan Light
Nipple
Cover
End Cap
Rubber Washer
Metal Washer
Hex Nut
Compact Fluorescent
Bulbs Max.2-13W
(Bulbs Included)
Slide Switch
Reverse
Forward
