U-Camera User Manual - General System Introduction
1.2
1.2
Concept of system operation
Concept of system operation
The basic system operation concept is shown in Figure 1. When correctly placed, U-Camera
Gimbal, Harness and Board act as a single element, U-Camera. The interface with other
elements (FCS, Video transmitter) is done via U-Camera Harness.
The vehicle Flight Control System (FCS) is in charge of managing the gimbal, commanding
the required mode/angles/rates.
The power supply must be in the absolute range 9-28V, and U-Camera will internally
regulate the tension level. In order to provide a power supply for the Video Transmitter, U-
Camera has a 12V supply available for this purpose. For more information read the section
3.1.3.3
5
Figure 1: System concept
