background image

page 3

SAFETY PRECAUTIONS

Kindly read through the following carefully to avoid from damages in property or risk of personal injuries. 

The degree of harm and damages are divided between two categories identified by 2 distinctive signs:

LEGEND

Items that are of Prohibition nature 

       Items that are of Strict Enforcement nature

Do not use the unit in an environment exposed to open burning or heating equipment as it 

may lead to shortage of oxygen in the room. Use only appropriate gadgets for air exchange 

when using open burning equipment.

Do not alter or refigure or repair the unit on your own (may cause fire hazards, electric shock 

and personal injuries)

Do not operate the unit with wet hands (may lead to electric shock)

Do not insert your fingers or any external objects into the main unit or any of its air inlet or 

outlet as it may lead to damage of the fast operating turbine fans and personal injuries)

Do not expose the main unit, its motor or any of its spare parts to water as it may lead to 

short circuit or electric shock.

Do not turn on the unit when there is a possible leak of imflammable gases in the room as it 

may lead to gas explosion

Do not turn on the power supply of the unit during maintenance or inspection to avoid elec-

tric shock or personal injuries.

Do not allow children or persons with mobile disability to operate the unit unless under the 

careful supervision of the person responsible for their care

Do not attempt on repairing the unit or any of its spare parts if there are any damages. Ask 

for the help of the qualifies and trained professional for assistance.

WARNINGS

PRECAUTIONS

Do not place any foreign objects directly close to the air inlet or the air outlet of the unit.

Do not use open flames near the main unit as it may lead to possible high risk of fire hazard

Do not place any foreign objects on the unit especially water containment objects as the 

water leakage may sips into the main unit causing damage to the components and short 

circuit and electric shock.

Wear proper glove or protective gear when cleaning the filter net.

Do not attempt on the maintenance and servicing work on the unit other than the filter net. 

Engage professional help of qualified and trained technicians.

Ensure that the main unit and its spare parts are installed properly and fastened to its posi-

tion securely to avoid the unit from falling down and causing injury.

Do not attempt the installation of the unit, its spare parts, ductings and others on your own. 

Engage the help of the professional technician especially when needed.

Use the help of ladders when installation are being carried out in high level areas to avoid 

from falling and personal injuries.

Turn off the unit when it is not being used. Gathering dusts may cause the unit to overheat 

and cause possible fire hazards.

Turn off the unit when any abnormal noise or vibration or burning smell if detected. Call for 

professional help for inspection and servicing.

WARNINGS

    

Possibility of high risk of death or serious injuries

PRECAUTIONS 

 

Possibility of light injuries or physical or material damages

Summary of Contents for FS-150













Reviews: