Aircraft XAircraft X450, Instruction Manual

Page: 2 / 22

目录 Content
产品安装须知 1
飞行须知 2
产品特性 4
产品售后服务 5
侧臂安装 7
机架安装 A 8
机架安装 B （电调安装） 9
机架安装 C 10
飞行样式 11
电路安装 12
接收机接线示意图 13
遥控模式示意图 14
无桨通电测试 15
螺旋桨安装 16
地面摇杆测试 17
姿态传感器工作状态测试 19
零部件清单 20
以下设备不包括在 X450 的零部件清单中，用户须自行配备：
1. 至少 4 通的遥控器和接收机。
2. 3S 1500mAh ~ 5000mAh 的锂电池，瞬时放电能力 >15C 。
您还需要准备以下工具，并参考零部件清单进行安装：
1. 1.5mm 的六角螺丝刀（用于 M2 内六角螺丝）。
2. 十字螺丝刀，尖嘴钳。
3. 建议使用螺丝胶增强螺丝的可靠度。
请选择合适的飞行样式
X450 支持两种飞行样式: X 字飞行和十字飞行。它们分别有两种安装方式，请注意
区别。
X450 出厂时默认为 X 字飞行样式设置，当您选择十字飞行时，需要通过调参软件
( XAircraft Configuration )进行设置。建议初学者与首次使用 X450 者采用“ X 字飞行”
样式。
The transmitter, receiver and battery are NOT INCLUDED in the Parts List,
they are self-provided:
1. We recommend you to prepare a 4-CH (at least) transmitter and a 6-
CH (at least) receiver.
2. 3S 1500mAh~5000mAh Lithium Battery, instant discharge
capacity>15C.
When begin assembly, prepare tools below and pick out the parts
referring to the Parts List:
1. Hex Screw Driver for M2 Screws.
2. Cross Screwdriver , Sharp nose pliers.
3. It is suggested to use screw glue for higher intensity when assembly.
Choose the appropriate flight style fits for your habbit
X450 supports "Quadcopter Cross Style" and "Quadcopter Plus Style" flight
style. They are shown in the following graphs. Users have to distinguish the
two different installations. X450 is set to "Quadcopter Cross Style" by default;
you have to set the parameters via XAircraft Configuration for "Quadcopter
Plus Style". Starters and X450 new users are advised to choose "Quadcopter
Plus Style" for a better control and fly.
产品安装须知 Notice for Assembly
Notice for Assembly 1
After-Sale Service 6
Before Flight 3
Features 4
Frame Arm Assembly 7
Frame Assembly A 8
Frame Assembly B (ESC Wiring) 9
Frame Assembly C 10
Flight Style 11
Circuit Wiring 12
Common Receiver Wiring 13
RC Mode Illustration 14
Power-on Test without Propeller 15
Propeller Assembly 16
Stick Function Test On Ground 18
AHRS Function Test 19
Part List 20
1
www
.
xaircraft.com