5
How to Set Maximum Temperature for Heat Mode.
If necessary unlock the Set Up Function.
1
. Simultaneously press both the “SELECT” button & the “TEMP +” (Up) button for 3 seconds.
The screen will flash “Hi”, then release.
2
. Press and release “iHEAT” button. The “HEAT” symbol will flash. Then enter chosen
maximum temperature for Heat Mode by using the Temp “+” & “-“ buttons.
3
. Press and release the “OK/ENTER” button to lock it in.
How to Set Minimum Temperature for Heat Mode
If necessary unlock the Set Up Function.
1
. Simultaneously press both the “SELECT” button & the “TEMP –“ (Down) button for 3
seconds. The screen will flash “Lo”, then release.
2
. Press and release “iHEAT” button. The “HEAT” symbol will flash. Then enter chosen
Minimum temperature for Heat Mode by using the Temp “+” & “-” buttons.
3
. Press and release the “OK/ENTER” button to lock it in.
How to Set the Placebo Effect Function
The Placebo Effect is added to the Minimum temperature setting for Cool and Maximum
temperature setting for Heat.
For Example: In COOL mode If the minimum temperature is set by the owner to 23° and the
Placebo Effect is set to 5°. The Smart Remote display will scroll down to 18° but AC will
actually
still
be operating
no lo er than
23°.
In HEAT mode if the max temp is set to 21° and the Placebo Effect is set to 5°: The Smart
Remote display will scroll up to 26° but the AC will actually
still be operatin
no higher than 21°.
The default setting for the Placebo Effect is 0° (Off), during set up this can be adjusted between
0 and 5. A separate Placebo Effect can be set for Heat and Cool.
How to Set the Placebo Effect for Cool Mode.
If necessary unlock the Set Up Function.
1
. Simultaneously press the “SELECT” button & the “Number 8” button for 3 seconds. The
screen will flash “PL” and “COOL” symbols, then release.
2
. Using the Temp “Up ”&“Down” buttons enter the chosen number of Placebo Effect degrees.
3
. Press the “OK/ENTER” button to lock it in.
How to Set Placebo Effect for Heat Mode
If necessary unlock the Set Up Function.
1
. Simultaneously press the “SELECT” button & the “Number 7” button for 3 seconds. The
screen will flash “PL” and “HEAT” symbols, then release.
2
. Using the Temp “Up” & “Down” buttons enter the chosen number of Placebo Effect degrees
3
. Press the “OK/ENTER” button to lock it in.