1.5
Advisories
WARNING
Statements in this Section contain critical safety information. Read these statements carefully
before installing this unit.
WARNING
Observe standard safety precautions and wear safety glasses to prevent personal injury while
installing this unit in the aircraft.
WARNING
Shut off power before connecting or disconnecting the Telephone System Components (AirCell
®
ST 3100 system), as voltage transients may damage the unit or the interface wiring.
WARNING
Follow the manufacturer’s safety guidelines when using any solvents, epoxies, flammable liquids,
or any other materials during the installation processes. Some of these products are toxic to the
skin, eyes, and respiratory tract. Avoid prolonged contact and use only in well-ventilated areas.
WARNING
Components or subassemblies found in this unit may contain materials such as beryllium oxide,
acids, lithium, radioactive material, mercury, etc. that can be hazardous to your health. If the
component enclosure seal is broken, precautions must be taken against personal contact or
inhalation in accordance with Occupational Safety and Health Administration (OSHA)
requirements 29 Code of Federal Regulations (CFR) 1910.1000 or superseding documents.
Any
alteration of this product voids the FAA or Federal Communications Commission (FCC)
certification and the AirCell
®
warranty.
CAUTION
Use Isopropyl Alcohol carefully as it may react with some plastics in the area. Isopropyl Alcohol
should be used to clean connector contacts and metal parts, if required.
1.6
List of Related Publications
The following list includes related publications for the AirCell
®
ST 3100 Telephone system:
Publication Publication
Number
AirCell
®
Antenna Installation Manual
AirCell
®
800-10355
AirCell
®
Handset Installation Guide
AirCell
®
800-10055
Acceptable Methods, Techniques, and Practices - Aircraft Alterations*
FAA Advisory Circular
(AC) 43.13-2A
Acceptable Methods, Techniques, and Practices - Aircraft Inspection and Repair*
FAA AC 43.13-1B
Environmental Conditions and Test Procedures for Airborne Equipment
DO-160D
*Installation of the AirCell
®
ST 3100 shall be performed in accordance with these FAA Advisory
Circulars (as applicable).
Introduction
Page 1-3
Section 1
800-10680-C, May 2007
Summary of Contents for ST 3100
